VisorCentral.com
Blast from the past! We stopped updating VisorCentral in late 2002, but feel free to browse around and feel nostalgic. There are 135 reviews and over a thousand articles in our archives. Also check out an even older version of the site.
FrontStoriesProductsGuidesSupportDiscussionMobileAbout            
 
visorcentral.com >> Products & Reviews >> Fact Sheet
Fact Sheet & User Opinions

Page 2 of 4<< Prev | Next >>

Works with Visor, Deluxe, Platinum, Neo, Pro and Prism

Availability Unknown

$6.00
User Opinions
Thumbs Up  68% Thumbs Down 32%

Thumbs Up

good for the price
i wanted something to protect my prism without having to worry about stowing away the lid during use. this fits the bill. small enough investment to eat the cost until the form fitting model comes out.
by aquaboy

Thumbs Down

my clip is flawed
My clip was either bent or molded improperly, and won't stay on my Visor. To make things worse, tactilis won't reply to my emails. I tried using glue to hold down the bend in the clip, and even still the clip came off after I opened the cover a few times. I think the product may be good overall, but I got shafted.
by espectro

Thumbs Up

Affordable and USEFULL!
Wow! I am surprised at how nice this is. The Flip-Clip was made for the Visor and looks that way, I LOVE IT! The clear is REALLY CLEAR! I barly notice it's there. The Cover is nice, ut I can't wait for the Lid
by miradu2000 AKA Michael Ducker

Thumbs Down

Cover doesn't fit very well
Here's a good idea that's not quite right. The Flip clip is good but the curvature of the cover doesn't quite fit so the overall fit doesn't quite make it.
by MikeBo

Thumbs Up

Buy It.. No more Palm flip lid-envy
The original Handspring clip cover is alright, but I wanted a flip lid like the Palm guys... Finally we have it and it fits well on my Blue VDx with an Ice Lid.
by Google

Thumbs Up

Good for now, waiting for other lid.
I like the function of the clip and cover, and am looking forward to the Visor-specific cover. The only complaint I have is that the plastic does not seem as strong as the plastic on the OEM cover that came with my Visor. It's compartively flimsy. That being said, Handspring should have had something more like the Tactilis cover than the current cover sold with the Visors.
by Mike

Thumbs Up

Now or later?
First, I recommend a good fitting, protective case over any plastic lid (Palm or Visor). That having been said, the Tactilis Flip-Clip is better than the lid that comes with the Visor. It is hard to complain about a Palm-style lid not fitting properly when Tactilis explains that this lid is to serve only until the proper Visor lid is available. The review on this site and elsewhere explain this even more clearly. If you want something that fits like OEM equipment then stick with the lid that came with your Visor or wait for the next Tactilis lid. Whether Tactilis should have waited for the final Visor-style lid to be ready before releasing the product could be argued forever. The point is that the Flip-Clip is a good replacement lid for the money and pretty much does what it claims.
by MP

Thumbs Up

Excellent for the price
Mine fits perfectly (it doesn't click as the manual says). So far, I don't have flip-lid closing problem. Needs to see if the joints resist against wearing.
by Seal Pup

Thumbs Up

Wonderful! (need slight mod for Visorphone)
I am very happy with the flip-clip and cover. It took me about 15 minutes with a pocket knife an a multitool to make the minor mods (a bit of sanding too). I had to cut back the chamfered corners on the top of the the flip clip to allow it slide all the way down onto the visor, around the phone module. I also had to cut back the upper edge of the cover (between the pins that attach to the flip clip). The buttons on the visorphone were depressed when the cover was fully open. It also blocked the speaker. A bit of sanding to clean it up, and it now looks and works great!
by Mr. Coffey

Thumbs Up

Wonderful! (need slight mod for Visorphone)
I am very happy with the flip-clip and cover. It took me about 15 minutes with a pocket knife an a multitool to make the minor mods (a bit of sanding too). I had to cut back the chamfered corners on the top of the the flip clip to allow it slide all the way down onto the visor, around the phone module. I also had to cut back the upper edge of the cover (between the pins that attach to the flip clip). The buttons on the visorphone were depressed when the cover was fully open. It also blocked the speaker. A bit of sanding to clean it up, and it now looks and works great!
by Mr. Coffey


<< Prev | Next >>





 

Recent Additions Reviews
Raycom Personal Massager
Don't look directly into your stylus!
Review: Active Armor
Case or Keyboard?
MemPlug MemoryStick
Dockers Mobile Pants Revolutionize Pocket Design
Sprint PCS Wireless Web Digital Link
Review: VisorSolution's BattPlug
Review: Visorsolution's PowerPlug
Type away with ThumBoard
Fact Sheets
Infiniter 3P Stylus/Pen/Laser Pointer
Active Armor for Visor
ProRecord Digital Voice Recorder
Q-Pad
Charge-N-Run
Visor Pro
Mobile Pant
Handcam
JETLOG 24x7 PowerNapping Springboard module
Power Station

Copyright 1999-2016 Smartphone Experts. All rights reserved : Terms of Use : Privacy Policy
VisorCentral is not not affiliated with or endorsed by Handspring Inc in any way.